Results 1 to 5 of 5
  1. #1

    Default Anyone got a Stubben Trevira, if so

    please could you measure the metal pin (don't know the correct name) that goes into the hole on the girth strap.

    I've just had the straps replaced on my Wintec with leather ones and the saddler has put very thick girth straps, I've tried a few girths I've already got and the pin is too short for the straps (there's only about 3 mm of it sticking out when the girth is done up). I was going to get a new girth anyhow and decided on the Stubben after reading about it on here but there's no point getting it if the pin will be too short.

    Also do you think it is safe to ride with so little of the pin visable?

  2. #2
    Schoolmaster alliersv1's Avatar
    Join Date
    May 2009
    Location
    upwell, cambs
    Posts
    865

    Default Re: Anyone got a Stubben Trevira, if so

    The cord girth?
    I have one. I'll try and remember later.

  3. #3

    Default Re: Anyone got a Stubben Trevira, if so

    13mm on the inside

    (33mm full length)

  4. #4
    Schoolmaster alliersv1's Avatar
    Join Date
    May 2009
    Location
    upwell, cambs
    Posts
    865

    Default Re: Anyone got a Stubben Trevira, if so

    Beat me to it
    I made it 2.5 cm, but I was using a weightape!

  5. #5

    Default Re: Anyone got a Stubben Trevira, if so

    Thank you

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Find Horses For Sale